PENOSIL Acrylic Sealant 636 – white, 280 ml

PENOSIL Acrylic Sealant 636 is a high-quality water-based acrylic sealant for filling voids and joints before painting. The composition with a particularly fine texture ensures smooth, clean and impeccably finished surfaces. The sealant forms a long-lasting plastic bond that adheres perfectly to concrete, plaster, plasterboard, wood and most building materials. The product is UV and mold resistant and is suitable for both new construction and renovation.

As an added value, each purchased Acryl Sealant 636 package supports the Estonian Wrestling Federation, helping to promote the wrestling career of children and young people.

Product code: H4555
EAN: 4743307163752
Packaging: 280 ml
Color: White
Certificates: EC1+, M1

Features:

Bright white tone

Especially convenient to use

Non-drip – does not spill into the joint

Little smelly

Forms a plastic and durable connection

Paintable after complete drying

Good adhesion to most building materials

Moisture resistant 5 h after application

UV and mold resistant

Suitable for a smooth and high-quality finish before painting

Areas of use:

Filling wall cracks and joints

Joints between window and door frames and walls

Plasterboard joints and filling screw holes

Smoothing surface irregularities before painting

Contagiousness:

Concrete

Plaster

Drywall

Ordered

Wood

Construction tables

PVC

Instructions for use (310 ml cartridge):

Cut off the threaded end of the cartridge and install the nozzle.

Cut the nozzle to the required size at a 45° angle.

Place the cartridge in the caulking gun and fill the nozzle with material.

Apply acrylic to the joint with even pressure by sliding the tip along the joint.

Smooth the surface with a silicone scraper and remove excess material.

Instructions for use (600 ml foil package):

Open the gun’s dispensing nozzle and insert the package into the gun.

Remove the package retaining clip and close the gun with the nozzle.

Apply the acrylic evenly to the joint and smooth the surface with a scraper.

Additional information:

Largest connection area: 30 × 20 mm

Larger joints should be filled in two layers

Coagulation rate: 2.5-3 mm per day

You can paint only after complete drying — too early painting can cause cracks