Respirator with valve SUP AIR 23306 FFP3S

Sup Air 23306 FFP3S respirator with exhalation valve to prevent inhalation of dust and other small particles. The valve makes breathing easy and the mask can be worn for longer. Suitable for moderate amounts of fine dust (up to 50 x OEL) and oil- and water-based mists – plastering, cementing, sanding, wood dust and more. Check the seal before entering a dusty room and do not remove the mask in a dusty room. Use for up to one work shift. Sold only in full packs.

Key features

• Exhalation valve
• Protection level up to 50 x OEL

Standards and certificates

• EN 149:2001 FFP3

Warning! Does not protect against gases or vapours – use a gas respirator for that. Do not use if there is less than 17% oxygen, the composition or concentration of the dust is unknown or the dust is immediately dangerous to life. Beards and moustaches reduce effectiveness. Replace the mask if it has been removed in a dusty room, breathing becomes difficult due to clogging or the mask is damaged. Check the fit before each use: cover the mask with both hands and breathe in deeply; if there is leakage, adjust the nose clip or straps. If a tight seal cannot be achieved, do not enter the hazardous area.